| |
| | S08 Controller Area Network (msCAN)... | | This course will present you with a brief overview of the Freescale S08 multi-purpose Controller Area Network (msCAN) module. You will learn how the msCAN operates, as well as a method to compute the CAN bit time parameters.... |
|
| | S08 Slave LIN Interface Controller... | | This course gives you a brief overview of the Freescale's S08 Slave LIN Interface Controller (SLIC) module, including normal LIN operations and special features such as high speed LIN mode and byte transfer mode... |
|
| |
| | TechOnline | An Introduction to the RS08 CPU... | | This course will begin by describing the heritage of Freescale MCUs and outlining the goals of the CPU and its instruction set. We will then discuss the RS08 CPU programmer's model and describe the addressing modes that are available on this CPU. We ... |
|
| |
| | TechOnline | An Overview of HCS08 Parallel I/O and KBI... | | This course addresses the parallel I/O and Keyboard Interrupt Module (KBI) found on many of the microcontrollers in the S08 family. The intent of this course is to provide embedded control engineers with valuable implementation instructions on HCS08 ... |
|
| |
| | TechOnline | An Overview of HCS08 Clocks... | | This course will give you a brief overview of the S08 internal clock generator (ICG) and internal clock source (ICS) modules. You will learn about the important features of these modules as well as the different clock modes available. By the end of t... |
|
| |
| | TechOnline | HCS08 ADC Overview... | | This course describes the features of S08 ADC modules and provides detailed training for the 9S08QG8 ADC module. You will learn about ADC module features and registers: their purpose and configuration. You will also learn how to set up and configure ... |
|
| |
| |
| |
| |
